xD L4-1.8L (2ZR-FE) (2008)
Window Regulator: Service and Repair
Removal
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR: REMOVAL
REMOVAL
HINT:
-
Use the same procedure for both the RH and LH sides.
-
The procedure described below is for the RH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service
and Repair/Disassembly
4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
6. REMOVE FRONT DOOR TRIM BRACKET See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
7. REMOVE FRONT DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
8. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Disassembly
10. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.
11. REMOVE REAR DOOR ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
12. REMOVE REAR DOOR INSIDE HANDLE BEZEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
13. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly