xD L4-1.8L (2ZR-FE) (2008)
14. REMOVE REAR DOOR TRIM BRACKET See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
15. REMOVE REAR DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
16. REMOVE REAR DOOR GLASS RUN See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
17. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
(a) Detach the rear window weatherstrip so that the screw can be removed from the upper section of the rear door window division bar.
(b) Remove the 2 bolts, screw and rear door window division bar.
NOTE: Do not drop or damage the rear door window division bar when removing the bolts and screw.
18. REMOVE REAR DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Disassembly
19. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service
and Repair/Disassembly
20. REMOVE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.