xD L4-1.8L (2ZR-FE) (2008)
(d) Remove the 3 bolts and remove the front wiper motor.
Installation
WIPER AND WASHER: FRONT WIPER MOTOR: INSTALLATION
INSTALLATION
1. INSTALL FRONT WIPER MOTOR
(a) Install the front wiper motor with the 3 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Align the matchmarks on the crank arm and front wiper motor
(c) Install the crank arm with the nut.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(d) Apply MP grease to the sliding parts of the wiper motor and the rod of the front wiper link.
(e) Connect the rod of the front wiper link to the wiper motor.
2. INSTALL FRONT WIPER MOTOR AND LINK
(a) Connect the connector.
(b) Slide the front wiper motor and link as shown in the illustration and engage the rubber pin with the body.
(c) Install the front wiper motor and link with the 2 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(d) Engage the clamp.