xD L4-1.8L (2ZR-FE) (2008)
WIPER AND WASHER: REAR WIPER MOTOR: REMOVAL
REMOVAL
1. REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
4. REMOVE BACK DOOR INSIDE HANDLE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
6. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
(a) Open the rear wiper arm head cap.
(b) Remove the nut and rear wiper arm and blade assembly.
7. REMOVE REAR WIPER MOTOR
(a) Disconnect the connector.
(b) Loosen bolt A.
(c) Remove the 2 bolts and remove the rear wiper motor.
NOTE: Do not try to remove the bolts since they are integrated with the motor.