xD L4-1.8L (2ZR-FE) (2008)
/Page-2354003.png)
8. REMOVE REAR WIPER MOTOR GROMMET
(a) Remove the rear wiper motor grommet.
Installation
WIPER AND WASHER: REAR WIPER MOTOR: INSTALLATION
INSTALLATION
1. INSTALL REAR WIPER MOTOR GROMMET
(a) Apply MP grease to the entire surface of the wiper motor grommet lip.
HINT: Make sure that the hole does not get clogged with grease and the grooves on the lip are filled with grease.
(b) Install the rear wiper motor grommet with the mark directed up.
2. INSTALL REAR WIPER MOTOR
