seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Differential crown: dismounting and assembling > < Dismounting

Leon Mk1

Assembly
Assembly
–  Lubricate the retainer properly.
   
–  Fit in the retainer using the tools -U-40450 A/3- and -U-40450 A/10-.
t  Try not to introduce the retainer tilted.
–  Assemble the coupling flange together with the spring, the thrust washer and the tapered ring.
  E39-0002
–  Assemble the bolt for attaching the coupling flange. Use the tool -T20005-.
Tightening torque: 25 Nm
–  Assemble the coupled differential shaft on the gearbox flange.
t  Use a spanner with the appropriate diameter from tool -U-40020-.
Tightening torque: 45 Nm
Retainer for right coupling flange:
–  Assemble the counterweight -A- on the unit holder.
t  Position for assembly: According to the mark made for the dismounting. If no mark has been made, the counterweight must be assembled on the unit holder so that the greatest distance between the edge of the counterweight and the attachment bolts is facing forwards.
–  Check the oil level in the gearbox → Chapter.
–  Remove the negative terminal from the battery.
  E34-0093

Differential crown: dismounting and assembling > < Dismounting