seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
02J Gearbox: Dismount and assemble > < Clutch: repairing

Leon Mk1

Dismount
Dismount
   
–  Remove the cable for selection -A- and the cable for changing gears from the gearbox -B-, by levering with a flat key.
1 - Flat head key size 13
  Note!
If necessary, dismount the air filter.
  N34-0860
–  Dismount the cable holder from the gearbox -arrows-, if necessary, remove the flexible tube support from the clutch hydraulic system.
  N34-1180
–  Remove the cover from the central console by carefully moving it forwards.
  E34-0147
–  Turn the cover inside out and remove the handle from the gear stick, by loosening the clamp -arrow-.
  E34-0148
–  Unthread the attachment nuts from the central console -arrow-.
–  Raise the vehicle.
–  If there is one, dismount the soundproofing casing located beneath the engine/gearbox.
–  Dismount the two brackets located under the system of escape.
–  Remove the exhaust gas system through the double hose clip behind the front exhaust pipe → Rep. Gr.26.
–  Dismount the front and rear heat insulation plate.
–  Remove the protective box by pulling it downwards.
–  Extract the bolts that hold down the protective box for the operating mechanism to the bodywork.
–  Turn the protective box for the gearbox lever downwards and remove it together with the cables, attempting not to cause damage to any mechanical part or to the bodywork.
  E34-0149

02J Gearbox: Dismount and assemble > < Clutch: repairing