–
| Shift into 5th gear. Loosen the bolt -B-. Press the mobile sleeve and the gear mouth in the direction of the -arrow-; then tighten the bolt -1- to 25 Nm. |
l
| Control measurement: Between the mobile sleeve and the mobile pinion, a thickness gauge of 0.2 mm cannot be inserted. If necessary, repeat the adjustment process. |
–
| Shift out of 5th gear. The sleeve must be situated in neutral position and the synchromesh ring must turn freely in this position. |
–
| Successively select all gears several times. |
–
| Install the gasket and gearbox casing cover. |
–
| Tighten the bolts to secure the gearbox casing cover to a torque of 10 Nm. |
–
| Place the drain bolt and tighten to 25 Nm. |
|
|
|