Leon Mk1
| Gear change prongs: assembly overview |
| 1 - | Gearbox selector bolt |
| q | Identification → Fig. |
| q | After installing the spring washer, the commutation bolts must be able to move slightly |
| 2 - | Lock washer |
| q | Remove the spring washer, levering carefully with a screwdriver. |
| q | Installing → Fig. |
| q | Always replace |
| 3 - | 5th gear prong |
| q | Adjusting → Fig. |
| 4 - | Selector jaw of 5th gear |
| 5 - | Bolt. |
| q | 25 Nm |
| 6 - | Connection guide of 5th gear |
| 7 - | Circlip |
| 8 - | Washer |
| 9 - | Connection guide of 3rd/4th gear |
| 10 - | Connection guide for 1st/2nd gear |
| 11 - | Connection guide for reverse gear |
| 12 - | 3rd/4th gear prong |
| q | With gearbox commutation pin → Fig. |
| 13 - | Gearbox selector bolt |
| q | Identification → Fig. |
| q | After installing the spring washer, the commutation bolts must be able to move slightly |
| 14 - | Ball bearing |
| 15 - | Inner ring of ball bearing |
| q | Removing → Fig. |
| q | Insertion → Fig. |
| 16 - | Fork for 1st/2nd gear |
| q | With gearbox commutation pins → Fig. |
| 17 - | Gearbox selector bolt |
| q | Identification → Fig. |
| q | After installing the spring washer, the commutation bolts must be able to move slightly |
| 18 - | Circlip |
| 19 - | Reverse gear prong support |
| 20 - | Reverse gear prong |
| 21 - | Spring |
| 22 - | Sliding piece |
