seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Flanged shaft oil seals: removing and installing > < Layshaft: adjusting

Leon Mk1

Removing
Removing
  Note!
t  Protect the roller bearings and gear for speedometer actioning from damage and metal filings.
t  Before and after drilling the rivets, thoroughly clean the differential casing.
   
–  Drill the rivet heads, on the opposite side to the speedometer gear, with a 12 mm drill bit Ø.
–  Remove the rivets from their holes with a drift.
–  Heat the differential crown with the -SAT 1416- electric blower to 120 °C. Check the temperature with the-SAT 4002- digital thermometer.
–  Place the differential casing in a press and seaparate the crown from the case.
  V39-1282

Flanged shaft oil seals: removing and installing > < Layshaft: adjusting