seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Transporting and securing gearbox to assembly stand > < Gearbox support: dismounting and assembly

Leon Mk1

Pendulum support: dismounting and assembly
Pendulum support: dismounting and assembly
Pendulum reaction arm: removing
   
–  Remove central soundproofing -Anchorage points 1 ... 3-.
  A10-1565
–  Extract the bolts -1 ... 3- unscrew and remove the pendulum support.
Install pendulum support.
Installation is carried out in reverse order. The following must be taken into account:
–  Fit the pendulum support first to the gearbox and then to the assembly mounting bridge.
  A10-1578
ComponentNm
Pendulum support to subframe -item 1-100 + 90° → Remark → Remark
Pendulum support to gearbox -item 2- and -item 3-40 + 90° → Remark → Remark

1)  Renew bolts
2)  90º is equivalent to a quarter turn.
   

Transporting and securing gearbox to assembly stand > < Gearbox support: dismounting and assembly