seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing the oil sump, oil strainer, selection unit and internal cable harnesses > < Renewing oil seal for selector shaft

Leon Mk1

Operation process
Operation process
–  Remove the Multi-function switch -F125- → Chapter.
   
–  Remove the seal using a screwdriver carefully avoiding damage to the selection shaft.
–  Smear the outside circumference and the lips of the seal with ATF.
l  Installation position: the open side of the seal faces the gearbox.
  A38-0107
–  Insert the new seal ring, without tilting it until the pressure tool -T10174- is at the limit.
–  Install → Chapter and adjust → Chaptermulti-function switch -F125 -.
  A38-0108

Removing and installing the oil sump, oil strainer, selection unit and internal cable harnesses > < Renewing oil seal for selector shaft