Removing and installing the oil sump, oil strainer, selection unit and internal cable harnesses |
WARNING If the oil sump has been removed or if there is no ATF, the vehicle must not be started or towed. |
|
Note t
| The selection unit must always be replaced when faulty or dirty. |
t
| Rules of cleanliness to be taken into account when working on the automatic gearbox → Chapter. |
t
| Smear the O-rings and the seals with ATF. Other lubricants may cause irregularities in the operation of the hydraulic gearbox mechanism. |
t
| The selection unit and the cable harnesses with 8 and 14 pin connectors may be removed while the gearbox is still in place. |
|
|
|