Leon Mk1
Clutch release assembly, slave cylinder: Assembly overview |
1 - | Gearbox |
2 - | Input shaft oil seal: |
q | Changing |
3 - | Clutch slave cylinder with clutch release collar |
q | are a unit and may not be replaced separately |
q | Do not wash out the bearing. Wipe it only with a cloth |
q | Change the collar along with the slave cylinder if they make too much noise |
4 - | Bolt, 12 Nm |
q | 3 Units |
5 - | O ring |
q | Fit in the tube connection |
q | Lubricate with brake fluid before installing |