Leon Mk1
Note
|
1 - | Circlip |
2 - | Gearbox |
3 - | Circlip |
q | If the ball bearing → Item and the input shaft → Item is replaced then → Fig. must be re-established |
4 - | Ball socket |
q | Remove → Fig. |
q | Insertion → Fig. |
5 - | Sprocket of 5thª gear |
q | Releasing → Fig. |
q | Installation position: the groove -arrow- should point to the ball bearing → Item |
q | Insertion → Fig. |
6 - | Input shaft: |
q | With pinion for 3rdª/4thª and 6thª gear |
7 - | Cylindrical roller bearing |
q | Circlip |
q | Remove → Fig. |
q | Insertion → Fig. |
q | Installation position: the securing ring should be facing towards the input shaft |
8 - | clutch housing |