seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Gear oil level|replace > < Gear oil level
Check and refill
Check and refill
Gear oil → Electronic parts catalogue „ETKA“.
–  Raise the vehicle.
   
–  Remove bolts -1- and - 2- and remove central soundproofing panel.
  A10-10761
–  Unscrew oil level test and filler plug -arrow-.
  Note
Oil level is correct when the oil reaches the bottom edge of filling hole.
–  Tighten bolt -arrow- to specified torque → Chapter.
Oil specification for gears → Chapter.
  Note
If the oil level is not correct, complete oil level.
  A34-0603
–  Unscrew control lid -arrow-, start engine and let the gears work with engaged gear for about 2 minutes.
–  Stop the engine, remove oil cap -arrow- and check level again, top up if necessary.
–  Screw the oil level control lid and tighten with the appropriate torque → Chapter.
–  Install the middle soundproofing.
  A34-0603

Gear oil level|replace > < Gear oil level