seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling output shaft > < Dismantling and assembling 5th?gear

Leon Mk1

Dismantling
Dismantling
–  First remove the retention ring.
–  Release the conical roller bearing inner ring with the 4th gear mobile pinion.
   
–  Fit the kit (bag) -T20091- with the pulling claws adapter -T20091/30 - behind the bearing teeth; however, not behind the engagement teeth of the 4th gear!
–  Fit the tool and input shaft assembly in the vice inserting the adapter -U-40200/11 - for its removal.
  Note
When releasing the ring with the 4th gear mesh, ensure they do not fall on the ground (if necessary, ask for the help of a second mechanic).
  E35-10019
–  Release the 3rd and 4th gear synchroniser hub along with the mobile element.
–  Once the securing ring is removed, press out the 3rd and 4th gear synchroniser body and the mobile pinion for the 3rd gear together.
  E35-0148
–  Remove the input shaft components in order -1 … 10-.
  A35-0059

Dismantling and assembling output shaft > < Dismantling and assembling 5th?gear