seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Disassembly and assembly of the input shaft > < Repairing selector mechanism

Leon Mk1

Removal:
Removal:
–  Raise the vehicle and remove the left front wheel.
   
–  Remove bolts -1- and - 2- and remove central soundproofing panel.
  A10-10761
–  Remove left soundproofing -Anchorage points 1 ... 3-.
–  Place below the collecting tray -T20173-.
–  Remove the drain plug with the wrench -U 40090- and empty the gearbox oil.
  Caution
When removing the gearbox casing, some remaining gear oil may drip.
  A10-1566
–  Remove the bolts -arrows- and remove the gearbox casing cover.
  E34-10071
–  Take out the bushing pin -arrow- and remove the fork of 5th gear -1-.
–  Using the pliers -A-81124-, remove the circlip -2- for the 5th gear synchroniser body.
–  Using the pliers -A-81124-, remove the circlip -3- for the 5th gear mobile pinion.
–  Remove 5th gear synchro-ring
  E34-10072
–  Remove the hub and the synchronous ring of the 5th gear. For this purpose, fit the bridge with bolt - U 40100/1- at that location on the synchronous ring where the greatest contact surface to the hub is.
  E34-0266

Disassembly and assembly of the input shaft > < Repairing selector mechanism