seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing over-centre spring > < Clutch action

Leon Mk1

Removal:
Removal:
l  Remove clutch pedal mounting bracket → Chapter.
–  Move pedal to highest position. Take care that over-centre spring does not jump out of neutral.
  Note
When the securing bolt is removed from the clutch pedal, take the precaution of lightly holding the clutch pedal so that it does not jump out of neutral.
   
–  Remove the clutch pedal -1- from the mounting bracket -3-. To do so the nut -2- must be unscrewed, the clutch pedal must be slightly pressed, the screw -5- must be loosened and at the same time the over centre spring -4- must be removed.
  Note
t  Clutch pedal must remain connected to master cylinder actuating rod -arrow-.
  A30-0125
t  Grease all of the contact points with the spherical pivot and all of the contact surfaces using approved lubricating grease → Spare parts catalogue.
  E30-10013

Removing and installing over-centre spring > < Clutch action