| VW / AUDI tool | SEAT tool |
| Tube element -2040- | pressure tool -T20141- |
| Counterhold tool -3067- | Counterhold tool -T20176- |
| Tube -3259- | Tappet -T20039- |
| attachment tool -3301- | Tappet -T20182- |
| Press tool -40-21- | Extractor kit -T20140- |
| Release lever -80-200- | Lever -T20043- |
| Tray -V.A.G 1306- | Tray -T20173- |
| Torque wrench -V.A.G 1331- | Torque wrench kit -SAT 8010- |
| Hot-air blower -VAG 1416- | Hot-air blower -SAT 1416- |
| Roller bearing bush extractor -V.A.G 1582- | Kit (case) -T20022- |
| Locking device -V.A.G 1582/3- | Kit (case) -T20022- |
| Clamping frame -VW 313- | Tensioning tool -T20172B- |
| Final measurement plate -VW 385/17- | Spring retainer -T20026- |
| Universal bracket for gauge -VW 387- | Spring retainer -T20020- |
| Tightening plate -VW 401- | Tensioning tool -T20169- |
| Tightening plate -VW 402- | Tensioning tool -T20169- |
| Die -VW 407- | Tappet -T20027- |
| Die -VW 408 A- | Tappet -T20027- |
| Die -VW 412- | pressure tool -T20141- |
| Tube element -VW 423- | Tappet -T20153- |
| Tube element -VW 516- | Adjusting tool -T20056- |
| Engine and gearbox support -VW 540- | Gearbox support -T20172/4A- |
| Multipurpose tool -VW 771- | Tappet -T20099- |
| Extractor tool -VW 771/37- | Extractor kit -T20143- |
| | |
| Engine/gearbox jack -V.A.G 1383 A- | Engine and gearbox jack -SAT 1040- |
| Brake filling and bleeding unit -VAS 5234- | Brake bleeder -SAT 1175B- |
| Hot-air blower -VAG 1416- | Hot-air blower -SAT 1416- |
| Torque wrench -V.A.G 1331- or Torque wrench -V.A.G 1332- | Torque wrench kit -SAT 8010- |
| There is no equivalent case. Test measurements. | Kit (case) -T20022- |
| Pliers -T10005- | Pliers -T20059B- |
| Pliers for clamps -VAG 1275- | pressure tool -T20072A- |
| Gearbox support assembly -3282- | Gearbox support -T20138C- |
| There is no equivalent case. Test measurements. | Extractor kit -T20140- |
| Support plate -VW 309-, Support equipment -VW 313- | Rack -T20172/1- |
| Support plate -VW 309-, Support equipment -VW 313- | Tower -T20172/2- |
| Gearbox support assembly -VW 353- | Gearbox support -T20172/4A- |
| Tray -VAS 6208- | Tray -T20173- |
| Counterhold tool -3067- | Counterhold tool -T20176- |
| Gearbox suspension tool -3336- | Tensioning tool -T20186- |
| Centring mandrel. -T10086- | Centring pin -U 10050-10- |
| Spring retainer -10-222 A- | Spring retainer -U-30025E- |
| Choke clip for hoses -3094- | pressure tool -U 30042- |
| Lever -3409- | Lever -U 30800- |
| There is no equivalent case. Test measurements. | Extractor kit -U 40100B- |
| There is no equivalent case. Test measurements. | Kit (case) -U 40200A- |
| There is no equivalent case. Test measurements. | Kit (case) -U 40300- |
