| t
| When removing the gearbox, the clutch slave cylinder must be extracted without opening the piping system. |
| t
| If the clutch slave cylinder is removed together with the hydraulic pipe, do not press the clutch pedal. Otherwise, the slave cylinder piston will be expelled. |
| t
| Ensure that the clutch press is not tilted during the removal and fitting work: Take the precaution of loosening and tightening the securing bolts in diagonal sequence, gradually in several stages |
| t
| To reduce the unpleasant smells of a burnt clutch, the clutch bell-housing must be thoroughly cleaned, along with the flywheel and engine at the side facing the clutch. |
|
|
|
