| –
| Remove drain plug -arrow- from gearbox housing. |
| –
| Fit drain plug with new oil seal, screw in and tighten → Item. |
| If ATF must be added, use -G 052 990 A2- (ATF as a part). |
| –
| Fill with approx. 2.5 litres of ATF (-G 052 990 A2-) through filler pipe. |
| –
| Then start engine and shift through all selector lever positions with vehicle stationary. |
| –
| Finally, check ATF level and top up → Chapter. |
|
|
|
