SEAT Workshop Service and Repair Manuals

Repairing selector forks, from gearbox date 13 01 3

Special tools and workshop equipment required

t	Thrust plate -VW 402-

t	Press tool -VW 411-

t	Tube -VW 426-

t	Thrust piece -VW 431-

t	Internal puller -1 - Kukko 21/3-

t	Counter support -4 - Kukko 22/1-

1 -	Rubber dampers

q	Can be removed from and inserted in selector rod by hand

2 -	Selector rod with selector fork for 1st and 2nd gears

3 -	Selector rod with selector fork for 3rd and 4th gears

4 -	Selector rod with selector fork for 5th and 6th gears

5 -	Selector fork for reverse gear

q	From gearbox manufacture date 03 10 5, ball sleeve → Item has been discontinued

q	Reverse gear selector fork is modified

q	Distinguishing between reverse gear selector forks → Fig.

6 -	Ball sleeve

q	Pulling out → Fig.

q	Pressing in → Fig.

q	From gearbox manufacture date 03 10 5, ball sleeve has been discontinued

Distinguishing between reverse gear selector forks

Dim. “a” mm	Gearbox manufacture date
24	from 02 10 5
18	from 03 10 5

Through gearbox date 02 10 5 - pulling out ball sleeve for reverse gear selector fork A -  Internal puller, 18...23 mm, e.g. -Kukko 21/3- B -  Counter support, e.g. -Kukko 22/1-

Through gearbox date 02 10 5 - pressing in ball sleeve for reverse gear selector fork