seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear final drive > < Repair shaft bevel gear mounting

Leon Mk1

Adjustment overview - manual gearbox
Adjustment overview - manual gearbox
  Note
If repairs have been carried out to the gearbox, it is necessary to adjust input shaft, output shaft for 1st to 4th gear, output shaft 5th, 6th and reverse gear or differential only if components have been renewed which have a direct effect on the adjustment of the gearbox. To prevent unnecessary adjustments, refer to the following table:
   
  To be adjusted:
  Input shaft → ChapterOutput shaft for 1st through 4th gears → ChapterOutput shaft for 5th, 6th and reverse gear → ChapterDifferential → Chapter
Parts renewed:Gearbox housingxxxx
 Clutch housingxxxx
 Input shaftx   
 Output shaft for 1st through 4th gears x  
 Output shaft for 5th, 6th and reverse gears  x 
 Differential cage   x
 Input shaft tapered roller bearingx   
 Tapered roller bearing for 1st to 4th gear output shaft x  
 Tapered roller bearing for 5th, 6th and reverse gear output shaft  x 
 Tapered roller bearings for differential   x

   

Removing and installing rear final drive > < Repair shaft bevel gear mounting