seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Output shaft for 5th, 6th and reverse gears > < Table of shims

Leon Mk1

Carrying out check measurement
Carrying out check measurement
l  Determined shim installed.
   
–  Set up measuring tools and secure to clutch housing using bolt -arrow-.
–  Set dial gauge (3 mm measuring range) to “0” with 1 mm preload.
–  Loosen clutch housing/gearbox housing securing bolts diagonally until the bolts release the gearbox housing or output shaft.
–  If correct shim has been selected, dial gauge will indicate a value between 0.15 mm to 0.25 mm.
  N35-0240

Output shaft for 5th, 6th and reverse gears > < Table of shims