SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Seal for the output flange of the bevelled gear: Renewing (bevelled gear removed) >
< Seal between the gearbox and the pair of bevelled gears, in the pair of bevelled gears: replace
Leon Mk1
6-speed manual gearbox 02Q, all-wheel drive
Final drive, differential, differential lock
Seal between the bevelled gear and the gearbox, in the bevelled gear: replace
Seal between the bevelled gear and the gearbox, in the bevelled gear: replace
Seal between the bevelled gear and the gearbox, in the bevelled gear: replace
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda
→ Chapter
.
Special tools and workshop equipment required
t
Extractor kit -T20143-, see equivalent
→ Anchor
t
Hose clamp -T10298-, see equivalent
→ Anchor
–
Remove the pair of bevelled gears
→ Chapter
–
Remove the seal with the extractor -T20143/1- or the extractor -T20143/2-
–
Fill half way with sealant grease
→ Spare parts catalogue
the space between the sealant lip and the dust guard
-arrow-
–
Lightly lubricate outer edge of new seal.
–
Fit new seal as far as it will go using tappet -T10298-.
–
Install the bevelled gear
→ Chapter
.
–
Check the pair of bevelled gears oil level
→ Chapter
6-speed manual gearbox 02Q, all-wheel drive
Final drive, differential, differential lock
Seal between the bevelled gear and the gearbox, in the bevelled gear: replace
Seal for the output flange of the bevelled gear: Renewing (bevelled gear removed) >
< Seal between the gearbox and the pair of bevelled gears, in the pair of bevelled gears: replace