Leon Mk1
Note
|
1 - | Bearing socket for operation mechanism shaft |
q | Remove → Fig. |
q | Insert → Fig. |
2 - | The gear selection mechanism |
q | With gear selector mechanism cover |
q | It can be removed and fitted with the gearbox in place on the vehicle |
3 - | O–ring |
q | Put into the groove of the gear mechanism cover |
q | Fit with gear oil. |
q | Replacement |
4 - | Hood for gearbox breather |
5 - | Seal |
q | Replace → Chapter |
6 - | Bolt -20 Nm |