| l
| The required shim should already be fitted |
| –
| Fit the support -T20020- and measurement tools securing them to the clutch housing with the bolt -arrow-. |
| –
| Put the dial gauge (3 mm range) to „0“ with a pretension of 1 mm. |
| –
| Loosen, diagonally, the bolts securing the clutch housing to the gearbox until the gearbox housing or the secondary shaft may be lifted. |
| l
| If the correct shim has been selected, the dial gauge should indicate a value of between 0.15 to 0.25 mm |
|
|
|
