Leon Mk1
Note
|
1 - | Bearing socket for operation mechanism shaft |
q | Remove → Fig. |
q | Driving in → Fig. |
2 - | The gear selection mechanism |
q | With gear selector mechanism cover |
q | Can be removed and installed with gearbox installed |
q | Selector shaft in conjunction with modified mounting of reverse gear selector fork → Item |
q | Allocation of selector shafts → Fig. |
3 - | O ring |
q | Insert in peripheral groove of selector mechanism cover |
q | Lubricate with gear oil before installing |
q | replace |
4 - | Hood for gearbox breather |
5 - | Seal |
q | Replace → Chapter |
6 - | Bolt, 20 Nm |
|
Number of drive cams on the selector shaft | Reverse gear selector fork mounting |
Fig. -A- = 2 drive cams -arrow 1- y -arrow 2- | On the shaft for the reverse gear prong → Fig. |
Fig. -B- = 1 drive cam -arrow 3- | On selector rod with selector fork for 5th and 6th gears → Fig. |