Gear oil in bevel box

Make

SEAT

Model

Leon Mk1

Section

6-speed manual gearbox 0A6 › Gearbox mechanics,operation, construction,diff. › Gear oil in bevel box

Power transmissionGear oil in bevel box

Check gear oil level

Torque wrench -VAG 1331- Requirement: l  Bevel box must be in installation position. –  Remove noise insulation → General body repairs, exterior; Rep. gr.50. –  Place drip tray under bevel box.   Note Cover area beneath oil filler plug -arrow- with a cloth.

–  Remove oil filler plug -arrow- from bevel box. Oil filler plug -arrow- must be renewed. Oil level is correct when bevel box is filled to lower edge of filler hole. If oil should get on bevel box, carefully remove it. –  If necessary, top up with oil → Chapter. –  Screw in new oil filler plug -arrow-. –  Tighten plug to specified torque → Chapter.

01 Transmission

The same page in: Leon Mk2.