seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gearbox,mechanics,gears,shafts,internal operation > < 1.6?l - 77?kW CR TDI and 1.8?l - 118?kW TFSI engines

Leon Mk1

Transporting gearbox and securing to assembly stand
Transporting gearbox and securing to assembly stand
Gearbox removal, Ibiza 2008 ►, Ibiza ST 2010 ► → Chapter.
Gearbox removal, Altea 2009 ►, Altea XL 2009 ►, Leon 2009 ► → Chapter.
Install gearbox → Chapter.
   
Special tools and workshop equipment required
t  Eyes -10 222A/12-, see equivalent → Anchor
t  Support equipment -2024A-
t  Hooks -3368-
t  Spring retainer -VW 309-
t  Gearbox support assembly -VW 353-

   
Transporting the gearbox.
  N34-11395
–  Remove both caps of the ventilation -arrow- and fit a suitable cap so that the opening remains oil tight.
  Caution
Risk of damage to the gearbox.
In the hydraulic oil field of the Mechatronic for dual clutch gear box - J743 - the level cannot be checked. For installation the exhaust of the mechatronics for - J743 - double clutch gearbox must be locked. The hydraulic oil from the field of Mechatronics for dual clutch gear box -J743- the leaking oil cannot be refilled or controlled !
The gear box oil range from the transmission oil can be duly refilled only by a gear box oil changing . The level can not be verified.
The function of the gearbox will be affected when the filling of both oil areas is inadequate or excessive.
–  Remove both sealing caps -arrow- and seal the opening so that oil cannot escape using a clean plug from the sealing plug set -VAS 6122-.
l  After fitting the gearbox in the vehicle, the plugs must be removed and the breather caps must be refitted.
  N30-10235
Secure gearbox on gearbox support -VW 353-.
  N30-10236
Lift the gearbox onto the assembly stand.
The gearbox is fixed to the holder -VW 353- and lifted onto the »assembly stand«. Use support tool -2024A- for this purpose.
  N34-11401

Gearbox,mechanics,gears,shafts,internal operation > < 1.6?l - 77?kW CR TDI and 1.8?l - 118?kW TFSI engines