t
| To fit the selector lever handle -2-, button -1- must be raised to the maximum, secured with a cable clamp -arrow- or an assembly tool supplied with the new handle by the manufacturers. |
t
| If, by accident, the button was not secured, it must not be removed from the selector lever handle using auxiliary mechanical tools. Place a compressed air gun underneath the handle and make the button come out using compressed air. |
–
| Insert the complete selector lever handle -2- on to the selector lever; the button -1- must face in the direction of the driver. The handle should be set onto the selector lever housing. |
–
| Remove the cable harness -arrow- or the assembly aid; the button mechanism is now inserted into the vertical groove of the selector lever. If necessary, use pressure to insert the button into the selector lever handle. |
|
|
|