SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Fault finding >
< Electrical components
Leon Mk1
Automated manual gearbox 02E for front-wheel drive
Technical data
Gearbox identification
Gearbox codes: Display
Gearbox codes: Display
On some gearboxes, the engine code is located on the upper part near the gear selection lever control cable, or on the rim of the joint between the two housings
-arrows-
.
–
Remove engine cover
→ Booklet101
.
–
Remove the air filter body, breather hose and air duct hoses
→ Rep. gr.24
and
→ Rep. gr.23
.
Observe the codes when they are under the gearbox console
–
Remove engine cover
→ Booklet101
.
–
Remove the air filter body, breather hose and air duct hoses
→ Rep. gr.24
and
→ Rep. gr.23
.
–
Remove battery
→ Electrical system; Rep. gr.27
.
–
Remove battery tray
-arrows-
.
–
Position bracket -U-30025E- on bolted flange for wing panels.
–
Next, separate the hoses and cables that may be in the area of the engine where the rings that grip the support -U-30025E - go.
–
Place eyes onto spindle hooks.
–
Slightly tension the engine assembly/gearbox via the spindles.
–
Unscrew the bolts
-1- and -2-
from the console
-A-
.
–
Move the gearbox slightly downward by loosening the spindle on the support -U-30025E- until the console can be removed
-arrow-
Installation is carried out in reverse order. The following must be taken into account:
–
Replace the bolts
-1 and 2-
of the
→ Rep. gr.10
Automated manual gearbox 02E for front-wheel drive
Technical data
Gearbox identification
Fault finding >
< Electrical components