t
| Loosen and tighten securing bolts and nuts for covers and housings diagonally. |
t
| The tightening torque values listed apply to unlubricated nuts, bolts and screws. |
t
| Clean thread of bolts from remnants of locking fluid using wire brush. Then insert bolts with locking fluid AMV 185 100 A1. |
t
| Use thread tap to remove remains of locking fluid from all threaded holes in which self-locking bolts are to be screwed. Otherwise there is a danger of the bolts shearing off the next time they are removed. |
t
| Always renew self-locking nuts and bolts. |
|
|
|