| Always make sure that no dirt can enter an »open« gearbox. In particular, dirt entering an »exposed«mechatronic unit for dual clutch gearbox -J743- or oil pump can lead to gearbox failure. |
| t
| If gearbox covers have been unbolted or gearbox has no fluid, do not run engine or tow vehicle. |
| t
| First thoroughly clean connecting points and surrounding areas and then loosen bolts. |
| t
| When installing the gearbox, ensure that dowel sleeves between the engine and gearbox are correctly located. |
| t
| Place removed parts on a clean surface and cover them to prevent them from getting dirty. Use foil or paper. Use only lint-free cloths. |
| t
| Install only clean parts: only remove replacement parts from packaging immediately prior to installation. |
| t
| Carefully cover or seal open components if repairs cannot be completed immediately. |
|
|
|
