Leon Mk1
Reverse gear clutch: general fitting diagram |
Checking the clutch action → Anchor |
1 - | Circlip |
q | Mark when dismantled and assemble in the same position |
2 - | Support disc |
q | Fitting → Anchor |
q | Determine thickness → Anchor |
3 - | Inner disc |
q | Fitting → Anchor |
q | Number of parts |
4 - | Outer disc |
q | Fitting → Anchor |
q | Number of parts |
5 - | Circlip |
q | Remove by levering with a screwdriver |
q | Fitting → Anchor |
6 - | Spring support plate |
q | With springs |
q | Fitting → Anchor |
7 - | Seal |
q | Always replace |
8 - | Piston |
q | Choose the spare part according to the gearbox code |
9 - | Seal |
q | Always replace |
q | The sealing lip should be facing the clutch bell housing |
10 - | Clutch bell housing |