SEAT Workshop Service and Repair Manuals

Removing and installing the battery for the main key with radio remote control 1 -  Transmitter unit, upper part (inside) 2 -  Button battery 3 -  Padding 4 -  Sending unit, lower part 5 -  Key with variable code transponder

removing –  Insert screwdriver into slot between transmitter unit -1- and key-2-. –  Move a screwdriver in the direction of the -arrow- and disengage transmitter pommel -1-.

–  Open the transmitter pommel by levering the retention lugs -arrows-.

–  Unclip the battery -1- using a screwdriver to remove it from its fittings -2- in the direction of the -arrows- .

–  Carefully pry out pad -1- with screwdriver; do not damage in the process.

Installing When installing battery, observe polarity and installation position. –  Place cover -3- in lower part of transmitter unit. –  Place battery-2- on pad with positive pole pointing downward. –  Connect both parts of radio container -1- and -4- with one another. –  Next fit transmitter knob with key -5-.