–
| Fit the Bowden cable -2- in the front bonnet lock and check that the ball -1- at the end of the Bowden cable is correctly fitted in the lock of the bonnet. |
WARNING Before closing front bonnet, check the working of the Bowden cable and the operating lever. |
When carrying out the test, the front bonnet should fit into the lock, until the first click is heard. |
|
If, on closing the front bonnet, the tolerance measurements are different to the adjusted tolerances, this may be corrected by adjusting the front bonnet lock and the retention hook → Rep. gr.00. |
|
|
|