seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Floor trim > < Side adhesive logo, Copa: removal and installation

Leon Mk1

Tank flap unit, Ibiza ST: removal and installation
Tank flap unit, Ibiza ST: removal and installation
Special tools and workshop equipment required
   
t  Torque wrench kit -SAT 8010-
Removing
–  Open the tailgate.
–  Remove the fastenings on the tray behind the tailgate.
–  Remove tailgate trim → Bodywork, interior assembly work; Rep. gr.70.
  L00-10226
–  Undo the four nuts -1- from the tailgate frame.
–  Loosen the fixing clamps -2- and pull out the tailgate strip -3-.
–  Disconnect the connector of the number plate lighting and remove the tailgate strip -3-.
Installing
–  Insert the connector of the number plate lighting.
  E66-10217
–  Fix the tailgate strip -3- to the tailgate using clips.
–  Tighten the nuts -1- with a tightening torque of 3 ± 0.5 Nm.
–  Install tailgate trim → Bodywork, interior assembly work; Rep. gr.70.
  E66-10217

Floor trim > < Side adhesive logo, Copa: removal and installation