seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Side roof frame Exeo ST 2009: Assembly overview > < Roof joint moulding Exeo ST 2009: Removing and installing
Decorative roof trim: Removing and installing
Decorative roof trim: Removing and installing
  Note
The side window can remain installed when removing the roof trim strip.
   
1 - Roof moulding
q   -B- pillar trim removed → Chapter
q   Door seals detached in area of roof trim strip.
q   Prise the trim strip -2- out of the decorative roof trim
q   Drill heads off pop rivets -3-, knock out shanks and detach roof trim strip.
2 - Trim strip
q   Apply lubricant to edges to facilitate installation.
q   Press into decorative roof trim, working from front to rear.
3 - Pop rivet
4 - Retaining clip
q   5x
5 - -C--pillar trim
q   Pull off in direction of travel
6 - Side window roof trim moulding
q   Prise off carefully with plastic wedge starting at bottom and pull off in direction of arrow
  WARNING
Side window roof trim strip must NOT be twisted or bent as this would cause visible damage.

   

Side roof frame Exeo ST 2009: Assembly overview > < Roof joint moulding Exeo ST 2009: Removing and installing