Leon Mk1
Roof joint moulding Exeo ST 2009: Removing and installing |
1 - | Windscreen |
2 - | Sealing strip |
q | Apply lubricant before fitting |
3 - | Roof joint moulding |
q | Removing: |
– | Remove tailgate → Item. |
– | Remove the roof rails from the back carefully from beginning to decline roof joint. |
q | Installing: |
– | Mount the sealing profile -2- on the bar roof joints. |
– | Apply lubricant (e.g. soap solution) to sealing strip. |
– | Starting at windscreen -3-, slide roof joint moulding under trim cover and press section by section fully into roof joint, working from front to rear |