Leon Mk1
| Removing and installing roof joint moulding |
| 1 - | Roof joint moulding |
| q | Removing: |
| q | Starting from rear, carefully prise out of roof joint |
| q | Installing: |
| q | Attach sealing strip -2- to roof joint moulding -1- |
| q | Apply lubricant (e.g. soap solution) to sealing strip. |
| q | Starting at windscreen -3-, slide roof joint moulding under trim cover and press section by section fully into roof joint, working from front to rear |
| q | Then insert roof joint moulding below trim cover at rear window, and press into roof joint completely. |
| 2 - | Sealing strip |
| q | Apply lubricant before fitting |
| 3 - | Windscreen |
