Leon Mk1
| Seals on front door: installation overview |
Note| t | The inner door seals are provided with a sealant during assembly at the factory so that the door flange can be attached and then rolled down. |
| t | On removing the seal, the sealant spreads onto the interior of the seal and the sides open slightly. If the seal is reinstalled, correct sealing and proper positioning of the gaskets is no longer guaranteed. |
| t | Therefore each seal which is removed completely should be replaced by a so-called „tap-on“ seal. |
| t | If the gaskets are pulled out partially, it is necessary to press the sides of the seal together before installing. |
| 1 - | Reference angle for installation |
| 2 - | Front door seal |
| 3 - | Colour marking |
| t | Red dot for left side |
| t | Blue dot for right side |
