seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Bodywork, exterior installation work|Bumper > < Panorama roof
Drain hoses: cleaning
   
Drain hoses: cleaning
The drain hoses at the front -arrow- run from the A-pillar to the bulkhead of the engine compartment. To clean, access hose from the direction of the sunroof opening.
The rear drainage tubes -arrow- pass along the C struts and terminate at the rear wheel housings. The cleaning process is carried out starting from the wheel housing. The wheel housing must be removed beforehand for this purpose.

  Note
For the cleaning process, we recommend that a probe head of approx. 2300 mm made especially for this purpose is used that has an outer diameter that has been adapted to the inside diameter of the drain hose (e.g. the core of a former speedometer cable).
   

Bodywork, exterior installation work|Bumper > < Panorama roof