seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Cleaning and removing excessive adhesive > < Preparing detached or new retaining plate

Leon Mk1

Bonding retaining plate
Bonding retaining plate
–  Apply 2K polyurethane adhesive D 180 KD2 A1 directly to prepared and cleaned retaining plate bonding surface.
–  Adhesive bead diameter: Approx. 2.5 … 3 mm.
–  Press retaining plate into position on prepared windscreen immediately after applying adhesive.
–  Align retaining plate in position on ceramic pre-coat surface and secure with adhesive tape.
   

Cleaning and removing excessive adhesive > < Preparing detached or new retaining plate