seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing switches > < Driver seat, electrically adjustable|Tools

Leon Mk1

Removing and installing trim on sill side
Removing and installing trim on sill side
Removing
–  Undo the screw -1- (2 Nm).
–  Press clamping pin -2- inwards and remove spreader clip -3-.
–  Pull trim outwards off seat.
–  Disconnect wiring harness from driver seat lumbar support adjustment switch -E176--4- and driver seat adjustment operating unit -E470--5-.
   
–  Detach wiring harness from trim.
Installing
–  Install in reverse order of removal.
  N72-10297

Removing and installing switches > < Driver seat, electrically adjustable|Tools