seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Strut linings and side linings > < Roof lining

Leon Mk1

Removing and installing rear lid trim
Removing and installing rear lid trim
removing
l  The warning triangle has to be taken out.
–  Switch ignition OFF.
–  Remove window frame trims → Chapter.
–  If installed, remove the Rear lid closing button in luggage compartment -E406- → Electrical system; Rep. gr.96; Lights and switches in luggage compartment; Rear lid closing button in luggage compartment -E406-; Rear lid closing button in luggage compartment -E406-: removing and installing.
   
–  Remove the 2 screws -1- in the indentation for the warning triangle (1.5 Nm).
–  Remove screws -2- and handle indentation of the tailgate (1.5 Nm).
–  Lever trim out of fasteners in rear lid using wedge -T10383-.

Installation
–  Installation is carried out in reverse order.
  Note
Before installing, check retaining clips for damage and renew if necessary.
   

Strut linings and side linings > < Roof lining