seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Radiator grille > < Wheel housing liner

Leon Mk1

Removal
Removal
  WARNING
When doing this repair work, always wear protective goggles and leather gloves!
   
–  Protect edge of housing -1- against paint damage with e.g. fabric-reinforced adhesive tape.
–  Press bottom of mirror glass -2- into mirror housing -1-.
–  Using removal lever -80-200-, press -arrow 6- mirror glass -2- off bracket -5- and housing -1-.
–  Fold mirror glass -2- to one side -arrow 4- and detach connectors -3- for electric dip (where available) and mirror heating on rear of mirror glass -2-.
  N66-10019
–  Fold exterior mirror forwards to ease removal and fitting.
–  Remove retaining hook -2- with a screwdriver.
–  Pull mirror housing -1- upwards off mirror mounting.
  N66-10020
–  Remove retaining hook -2- from mirror mounting with a screwdriver.
–  Pull trim plate -1- off in -direction of arrow-.
  N66-10023
–  Remove bolts -4- and remove assembly part -1- from underneath.
–  Disconnect connection -5- for turn signal -3-.
–  Remove bolts -2- and remove turn signal -3- from assembly part -1-.
  N66-10021

Radiator grille > < Wheel housing liner