Leon Mk1
| Assembly overview |
Caution
|
| 1 - | Retaining strip |
| q | With adhesive tape for upper fastening |
| 2 - | Bolt |
| q | Qty. 3 |
| q | Specified torque: 1.5 Nm |
| q | To secure retaining strip to side member |
| 3 - | Bolt |
| q | Qty. 1 |
| q | Specified torque: 1.5 Nm |
| q | To secure side member extension in rear wheel housing |
| 4 - | Side member extension |
| 5 - | Bolt |
| q | Qty. 7 |
| q | Specified torque: 1.5 Nm |
| q | For attaching side member extension to retaining strip |
| 6 - | Seal |
| q | Supplied with retaining strip |
| 7 - | Bolt |
| q | Qty. 6 |
| q | 1.5 Nm |
| q | To secure retaining strip to side member |
| 8 - | Bolt |
| q | Qty. 1 |
| q | Specified torque: 1.5 Nm |
| q | To secure retaining strip to wing |
| 9 - | Adhesive tape |
| q | Supplied with retaining strip |
| q | With protective film, to be removed immediately before assembly |
