–
| Remove cushion from backrest in vicinity of side airbag until bolt -6- for side airbag is accessible. |
–
| Unscrew bolt -6- and put down. |
–
| Detach side airbag -5- from backrest frame at hooks -2, 3, 4- and remove, feeding side airbag wiring harness -1- through also. |
Installation is carried out in the reverse sequence; note the following: |
WARNING t
| Observe safety regulations for pyrotechnic components → Chapter. |
t
| Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is „electrically discharged“. for example by briefly grasping hold of door striker plate. |
|
Information for the fitter: for example tightening torques, renewing components → Chapter. |
|
|
|